Rescue Life 7 Manual and Semi Automatic Defibrillator
Rescue Life 7 Manual and Semi Automatic Defibrillator
Adult and Pediatric
Available in several languages and different options
Rescue Life is an external defibrillator with monitor. It is designed to be used by out-of-hospital and hospital users.
Supplied with internal Li-Ion battery, printer, 1 paper roll, patient cables 5 leads, 2 adult and pediatric reusable paddles, 2 disposable pads, main adaptor charger
Worldwide Delivery
After Sales Service Guaranteed
Secured Payment
Rescue Life 7 Manual and Semi Automatic Defibrillator
Adult and Pediatric
Rescue Life is an external defibrillator with monitor. It is designed to be used by out-of-hospital and hospital users.
Supplied with internal Li-Ion battery, printer, 1 paper roll, patient cables 5 leads, 2 adult and pediatric reusable paddles, 2 disposable pads, main adaptor charger
High contrast TFT LCD colour display 7""
Bright, high contrast, wide-angle colour display for simultaneous view of up to 12 ECG channels
Data management
The memory is based on a flash disk of 4 GB for 300 recorded hours for all AED models
Asynchronous and synchronous
- in asynchronous defibrillation, Rescue is advised on patients with the following symptoms: unconsciousness, absence of normal breathing and lack of detectable pulse.
- in synchronous defibrillation, Rescue Life is advised on patients with ECG's reporting Atrial Fibrillation.
3 operation modes: manual, AED, Advisory
- in manual mode RESCUE LIFE is intended for use by doctors and trained individuals. Only 3 steps: energy selection from 1 to 230J, energy charge and shock.
- in AED mode, RESCUE LIFE is intended for use by personnel authorized by a physician or medical director. The voice prompts and display messages are assisting the operator during CPR operations, charging automatically to 150J when a shock-able ECG rhythm is detected.
- in advisory Mode, the system alerts when the shock is necessary leaving the energy level and charging choice to the operator.
Initialising and system test at switching on of the device.
Auto test and fault recognition.
Specific References
Display:
- high contrast TFT colour LCD 7"" (800x480 dots)
- ECG through the discharge paddles (1 trace) or through 5, 10 leads patient cable for 3, 6, or 12 traces and SpO2 value
Automatic change over when plugging the patient cable
- filters: 50/60 Hz, base line, EMG
- heart rate indicator
ECG monitoring
- bandwidth: 0.5 to 120 Hz (-3db) with filters off
- speed: 5, 10, 25, 50 mm/sec.
- gain: 2.5, 5, 10, 20, 40 mm/mV with patient cable; auto with paddles
- HR digital readout on the display 20 to 300 bpm (± 2%)
- alarm: settable HR, min 20 bpm, max 250 bpm
Printer:
- manual, automatic (10""pre and post recording)
- integrated thermal printer for ECG traces and events documentation including HR/SpO2 values
- paper speed: 5, 10, 25, 50 mm/sec.
- paper width: 58 mm
Safety:
- two hand safety shock release
- ECG input insulation CF class
- internal discharge after 30 sec. of standby after charge
Power supply:
internal Li-Ion battery (Rescue Life 7"")
(charging time 95%: 2 hours)
AC 100-240 VAC, 50/60 Hz
Memory: internal flash 4 GB up to 300 hours of ECG data, events and usage review
General:
Dimensions: 36 x 24 x 34 cm
Weight: 5.5 kg with battery
9 other products in the same category:
Interested in product
Tell us your interest in this product and we will contact you for more details.