Maquet Pair of Goepel for Operating Table
Maquet Pair of Goepel (knee supports) for operating table. Supplied with 2 Maquet clamps
Alternup Medical suggest you a wide choice of Accessories for Operating Table, compatible with all of manufacturers: ALM, Schaerer, Steris, Maquet, Medifa...
Feel free to contact us, for any informations.
Maquet Pair of Goepel (knee supports) for operating table. Supplied with 2 Maquet clamps
Remote Control for ALM Transferis operating table
Tonsil Frame The tonsil frame is made for keeping the patients mouth open during tonsil surgery by means of a hook in the lower jaw of the patient and another hook on the frame.
Radial Clamp Universal A universal rotatable clamp for 16–20 mm post. Fits EU, US and UK accessory rail.
Arm & Hand Surgery Table, Carbon fiber, long Designed to fit several different operating tables. The table is made from carbon fiber laminate for excellent x-ray fluoroscopy facilities. On the rear end there is an accessory rail, for infusion stand and anesthetic frame.
Arm & Hand Surgery Table With twin clamps (hook on), height adjustable. Supporting leg included for (left or right mounting) depending om location of Surgeon or C-arm/microscope. Cushion included.
Cushion for Armtable, curved Injection molded Cushion, curved surface, for 10-380, 10-385 and 10-387.
Strap for armboard 10-380 and 10-387. Velcro fastening. Standard length 580mm , width 50mm Now available in length 700mm, item nr 10-383-L.
Leg and Body Strap with Clamp For Operating Table
Safety Side Rails For Operating Table The safety side rails are designed to support a patient on an operation/treatment table or trolley. They fold down easily and lock automatically when folded down to the vertical position. Made of stainless steel, sold in pairs. Option :...
Lateral Support For Operating Table Adjustable with 2 models of cushions included: 1 plane and 1 multifunctional curved cushion. The lateral support is also available as a rotating support ref: 10-560
Arm & Leg Guard For Operating Table This arm support is intended to give support to and hold the arms of the patient and prevent them from falling down outside the operating table.
Cover intended to be used together with arm holder 10-554 to get better comfort to the patient during long time operations. The pocket of the cover shall be pulled over the arm holder and be turned outwards to get the upholstery towards the patient.
Extension rail 25x10 mm, sold in pairs. The extension rails can be attached to EUR, UK or US accessory rail. Application shown in picture 2. Rail length = 225 mm
Hernia Bridge For Operating Table Hernia bridge with crank operated elevation. Adjustable width (490-550 mm) to fit various Operating Tables. The Hernia bridge is in the same performance as the Kidney elevator, with a difference in the plate. Cushions are included.
Leg/Body Strap for Operating Table Two piece Leg Strap, velcro fastening, designed to keep the legs of a patient fixed to the operating table during various surgical procedures.
Leg and Body Strap for Operating Table Leg Strap with “hook” and velcro locking. The leg strap 10-464 is designed to keep the legs or the body of a patient fixed to the operating table during surgical procedures. It is soft padded for high patient comfort.
Transport Handles For Operating Table The transport handle is intended to be fixed to the back section of an operating table when the operating table is to be moved with or without patient. The idea is to avoid moving the table using the head rest as transport handle. The transport...
Clamp For Operating Table A fixed non-rotatable clamp for the EUR standard rail 25x10. Accessories with a post diameter from 16–20 mm can be held in this clamp. Also available is a variant with flat pushing plunge for accessories with one or two flat surfaces on the post. The Clamp...
Head Support For Operating Table An universal head rest. The angel movement of the head plate is supported by a gas spring, which is released by a wide U-shaped release handle. Cushion is included.
Surgical Instrument Table for Operating table Our surgical instrument table in stainless steel provides practical space for surgical and GU-instruments and makes them available throughout the treatment. The surgical instrument table is made of stainless, hygienic and easy to clean.
Instrument Table for Operating Table The instrument table shall be adapted to the operating table by means of a rotatable clamp. The plate is mounted to a link with two pivots making it turnable in different ways. Thanks to the rotating clamp fitting, the table plate can always be set...
Clamp for fixing the operating table suitable for rods with a diameter of 20 mm. 16-18 mm on request.
Rotating clamp with rail mounting by clamping screw. For rod diameter 20 mm. 16-18 mm on request. Material: Stainless steel SIS 2333
Radial Clamp Hook On for Operating Table Simultaneous fixing of the camber and the accessory on the operating table rail. Material: Stainless steel SIS 2333
Rotating clamp with quick clamping lever for operating table Simultaneous fixing of the camber and the accessory on the operating table rail. Material: Stainless steel SIS 2333
Multi adjustable head support for ENT-plastic and eye surgery. The head support can be set between 110° below horizontal and 50° over horizontal. It has a unique locking system, that locks both pivots only by means of one lever. Standard fittings: Two pins diam. 15 mm C-C 106 mm. Other...
Head Support Double Link For All Operating Table The Head support is made for all kind of ENT surgery. Specifications: It can be set in any desired angel below and over horizontal. It has double links and a unique locking system, that locks both pivots only by means of one lever.It has a holder...
Children Head Support for Operating Table The Head support is made for all kind of ENT surgery on children. Specification: It can be set between 110° below horizontal and 50° over horizontal. It has a unique locking system, which locks both pivots only by means of one lever. The holder fits a lot...
Universal Head Support for Operating Table Specifications: The Head support is made for all kind of ENT surgery. The head support can be set in any desired angel below and over horizontal. It has double links and a unique locking system, which locks both pivots only by means of one lever. Cushion...
Neuro Head Support for Operating Table The headrest is designed for neurosurgery. It has a number of adjustment options, allowing the patient's head to be placed in any position. It adapts to all operating tables.
Antistatic Circular Head Cushion For Operating Table
Antistatic Pediatric Head Cushion For Operating Table
Foot Support for Operating Table Specifications: The foot support is intended to be used on split leg sections as well as on one piece leg section. The supports can be adjusted along the operating table to support patients of different length. They can also be adjusted in height to fit different...
Shoulder Supports For Operating Table The shoulder supports are made to support the shoulders of a patient when the operating table is put into Trendelenburg (head down) position. Two types of cushions included (see pictures), concave and plane. The concave one can easily be turned 180°,...
Knee Arthroscopy Holder Designed to keep a leg in a fixed position during surgery in the knee area. Supplied with: 3x Cushions included. Specifications: Height 26,5cm The arthroscopy holder is also available in XL. Ref: 10-353-XL It is recommended for patients with strong legs or during surgery...
Angular accessory rail (25x10 mm) with "hook on" clamp included (25x10 mm). This angular accessory rail is made to extend the normal rail on an operating table. Also, when a accessory have to be attached laterally or slanted out from the op.table, the angular accessory rail fits in. It can be...
Lateral Armsupport for Operating Table This arm support is intended to be a support for the upper arm of a side lying patient during surgical treatment.The arm support can be adjusted in several different positions for best possible comfort to the patient. The support can be adjusted in height,...
Weinberger Hand Fixation for Operating Table The Weinberger hand fixation is intended to be used to fixate the hand of the patient when the fore arm has to be stretched out by means of a traction device.
Lateral support for operating table Adjustable with 2 models of cushions : Plane and multifunctional curved cushion. The lateral support is also available as a rotating support ref: 10-561
Rotatable Lateral Support with curved cushion for operating table Lateral support, narrow with curved cushion 180x85mm, rotatable. The support can be rotated at the post and also the pad can be rotated. Length of post = 350 mm
Lateral Support Curved Cushion For Operating Table The support can be adjusted in height, longitudinal and lateral, depending on how the patient shall be positioned. Length of post: 350 mm
Tibia Support for Operating Table The Tibia Support is designed to support the knee or the foot of a patient during knee or leg surgery. The tibia support is also available in a smaller version, Ref: 10-367-K
Vertical Supporting Cushion for Operating Table The lateral support can also be adjusted to various angels by means of a gear device The roller support is also available as a Horizontal support, Ref: 10-369
Supporting Frame for Operating Tabl The supporting frame is intended to be used together with surgical retractors to keep an operating cavity open for better access to the surgeon.Clamp included. It has several positioning possibilities, which make the surgical retractors work the best way.
WhatsApp Chat